|
Mass-mailing Worms
Continued from page: 1
Friday, October 01, 2004
Installing 3Com LAN Supervisor
Find 3com_network_supervisor_v4_0_1.exe on our this month's PCQ Xtreme DVD and copy it to your hard disk.
Double-click and run this file. A wizard will appear to guide you through the installation process. After installation, you should automatically see a configuration wizard to help you set up and use it on your network.
On the prompt asking you to 'Create a new network map' or open an existing map, select 'Create a new Network Map' and click on OK. You will see three options: Automatically discover all devices on your subnet, Discover all notes that are connected to a default gateway and Specify and use your own subnet. Select the first option if you have a single subnet, the second option if you have multiple subnets connected through a single gateway, and the third option if you have a mixed network with different subnets. If you selected the third option, you will be presented with a dialogue box asking for the desired subnets. Enter them and click on Next. You will be asked if you want to set up Stress Monitoring on the discovered devices. Select Yes and continue with the wizard. Wait for the detection process to complete and the software will create your network map for you.
Now, you can select any device on your network and set the threshold limits for them by right-clicking on the device. You can even find all the possible routes between two nodes in your network.
Page(s) 1 2
|
Print
Comment
Email
Digg
Del.icio.us
Reddit
Twitter
